Perfect for quantity orders, the new flagpole hardware redesign for the Best Seller Falcon Flag® is the economical choice. Plus, with upgraded hardware, its new pole connections give more height options.
Now in more sizes, you can find your favorite Falcon® flags in these heights:
XS (7') 20.5"w x 63.25"h
SM (8.25') 20.25"w x 80.5"h
MD (10.5') 24.25"w x 104"h
LG (14') 24.25"w x 140"h
XL (17') 24.25"w x 183.5"h
Falcon Flag® is intended for display outdoors. Insert the spike base into grass or use the X-base to stand on concrete. We custom print your graphic artwork on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Perfect for quantity orders, the new flagpole hardware redesign for the Best Seller Falcon Flag® is the economical choice. Plus, with upgraded hardware, its new pole connections give more height options.
Now in more sizes, you can find your favorite Falcon® flags in these heights:
XS (7') 20.5"w x 63.25"h
SM (8.25') 20.25"w x 80.5"h
MD (10.5') 24.25"w x 104"h
LG (14') 24.25"w x 140"h
XL (17') 24.25"w x 183.5"h
Falcon Flag® is intended for display outdoors. Insert the spike base into grass or use the X-base to stand on concrete. We custom print your graphic artwork on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Custom Printed Pole Flags are printed using direct to fabric dye sublimation on premium 3 oz. Polyester and have a canvas reinforcement strip with 2 grommets on either the left or the right side, parallel to the short side of the flag.
Custom Printed Pole Flags are printed using direct to fabric dye sublimation on premium 3 oz. Polyester and have a canvas reinforcement strip with 2 grommets on either the left or the right side, parallel to the short side of the flag.
Perfect for quantity orders, the new flagpole hardware redesign for the Best Seller Falcon Flag® is the economical choice. Plus, with upgraded hardware, its new pole connections give more height options.
Now in more sizes, you can find your favorite Falcon® flags in these heights:
XS (7') 20.5"w x 63.25"h
SM (8.25') 20.25"w x 80.5"h
MD (10.5') 24.25"w x 104"h
LG (14') 24.25"w x 140"h
XL (17') 24.25"w x 183.5"h
Falcon Flag® is intended for display outdoors. Insert the spike base into grass or use the X-base to stand on concrete. We custom print your graphic artwork on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
14ft. Large Feather Flag w/Spike Base is a great height for garnering attention outdoors. Custom printed on polyester mesh by the process of dye sublimation, inks heavily saturate the material to create "bleed-through" visual effect for single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on graphic for easy pole insertion. A set of grommets installed on lower trim receives the short bungee cord (included) through its loop and snuggly attaches the graphic to the base. Insert spike base into grass.
14ft. Large Feather Flag w/Spike Base is a great height for garnering attention outdoors. Custom printed on polyester mesh by the process of dye sublimation, inks heavily saturate the material to create "bleed-through" visual effect for single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on graphic for easy pole insertion. A set of grommets installed on lower trim receives the short bungee cord (included) through its loop and snuggly attaches the graphic to the base. Insert spike base into grass.
Perfect for quantity orders, the new flagpole hardware redesign for the Best Seller Falcon Flag® is the economical choice. Plus, with upgraded hardware, its new pole connections give more height options.
Now in more sizes, you can find your favorite Falcon® flags in these heights:
XS (7') 20.5"w x 63.25"h
SM (8.25') 20.25"w x 80.5"h
MD (10.5') 24.25"w x 104"h
LG (14') 24.25"w x 140"h
XL (17') 24.25"w x 183.5"h
Falcon Flag® is intended for display outdoors. Insert the spike base into grass or use the X-base to stand on concrete. We custom print your graphic artwork on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
Perfect for quantity orders, the new flagpole hardware redesign for the Best Seller Falcon Flag® is the economical choice. Plus, with upgraded hardware, its new pole connections give more height options.
Now in more sizes, you can find your favorite Falcon® flags in these heights:
XS (7') 20.5"w x 63.25"h
SM (8.25') 20.25"w x 80.5"h
MD (10.5') 24.25"w x 104"h
LG (14') 24.25"w x 140"h
XL (17') 24.25"w x 183.5"h
Falcon Flag® is intended for display outdoors. Insert the spike base into grass or use the X-base to stand on concrete. We custom print your graphic artwork on polyester mesh by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided prints, and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.